AHSS Technologies in the 2016 Nissan Titan XD
- 2018-11-29 10:35:00
- LUQIMENG Original
- 2584
Titan XD concept
The TITAN XD original concept was to be strong.
How Strong???
They wanted to use VALYRIAN STEEL
But that idea was shot down
Building on Innovation
2004 Titan Innovations:
? Spray-on bedliner
? Utili-track system with
tie-down cleats
? Tailgate lighting
? Dampened tailgate
? 180 degree rear door
Building on Innovation 2016 Titan XD Innovations : :
? First non-HD truck to offer a factory-installed Gooseneck Hitch
? LED bed rail lighting
? Removable, lockable in-bed storage
? 120V Power Point
? Towing aids: trailer light check & backup camera
Additional 98kg would be required to meet the same structure requirements with mild steel alone!
Cabin Variation Concept
Utilized 1 st Generation Titan Carryover Content
New FR PLR and ROOF RAILS but Common for all CAB types
Hydroform Design
Using Hydroforming in body structure is 1 st time usage in Nissan.
? Approximately 25%-30% section strength improvement allowing for thinner material at same performance
Nissan hydroform design is manufactured using PSH manufacturing because of the lower pressure required and the better control of wall thickness.
Keep deformation mode as Previous Generation
Improve B PLR bending structure with Roof Crush CM
1. Improve Side Roof rail intrusion
2. Improve B PLR UPR bending structure
SIDE ROOF and B PLR UPR joint structure improved from 1 st Generation Titan
Improved Global torsion stiffness also will improve Door & B PLR vibration
Bed Improvements
DESIGN CHANGES (FOR THE XD MODEL )
- BED FLOOR PANEL –UPGAGED BY 10% AND BEAD PATTERN CHANGED TO ENABLE 20% ADDITIONAL WELDING
- MID-SPAN #3 AND #4 CROSS MEMBERS UPGAGED BY 65% AND 30% RESPECTIVELY AND #4 SECTION INCREASED BY 30%
- ADDITIONAL BOLSTER #7 ON THE FLOOR FOR IMPROVED DURABILITY
- 8 BOLTS ADDED BETWEEN THE BED AND BOLSTERS FOR IMPROVED DURABILITY
- TAILBOLSTER MATERIAL UPGRADED TO A 97% HIGHER STRENGTH STEEL(440MPa)
- REAR STRUT INNER UPGAGED BY 28% AND UPGRADED TO A 97% HIGHER STRENGTH STEEL(440MPa)
? Titan XD SAE J2807 certified up to 12,310 lbs conventional tow rating
? Cooling (Davis Dam), Acceleration (12% grade), Handling (under steer & trailer sway), Braking, & Structure (SAE J2638)
? 1 st Light Duty Truck to offer factory-installed Gooseneck Hitch
? Key Advantages: improved stability, reduced sway, tighter turning radius, better maneuverability
